User's Manual

34
Dial Numbers (the displayed telephone number of Phone Book Memory)
1. With the desired telephone number showing on the display, press
button. The
telephone dials out the displayed telephone number automatically in speakerphone
mode.
2. The display shows dialed out telephone number and counting timer.
OR
1. Pick up the handset or press SPEAKER button (the speaker LED will light) and wait
for a dial tone.
2. Press and release PHONE BOOK button,
icon is shown.
3. Review the stored phone number by pressing ▲ or ▼.
4. Press
button
Recording / Editing / Deleting voice prompt of name of phone book
When an incoming call is received, the unit will display and announce the caller's phone
number. If the caller's phone number is stored in the phone book, and caller's name will
be displayed as well.
If the voice prompt is recorded for this phone number, the unit will announce the voice
prompt recorded instead of the caller's phone number.
1. To record names press and release the MENU button until the "NAME
RECORDING" is shown.
2. Press the
button. A list of the phone book entries will be display.
3. Press ▲ or ▼ to select the list you like to record a voice or name for it.
4. To record or edit the voice prompt, hold down button. Speak clearly into the
microphone after a beep and “VOICE” icon is flashing. Release the button when you
finished or the unit will stop recording after 3 seconds. The new voice prompt will
then be played automatically.
To delete the voice prompt recorded, press DEL button during the voice prompt is
playing.
5. Repeat step 3 to 4 to edit or delete more entries or exit the set-up mode by pressing
the PHONE BOOK button.
To Edit the Phone Book Memory
1. Press and release PHONE BOOK button,
icon is shown.
2. Select the required location from the phone book by pressing ▲ or ▼.
3. Press and hold MENU button for two seconds. The display will show EDIT?.
4. Press
button, the first digit of the selected phone number will flash.