User's Manual

5. You can move the cursor to the required position by pressing ▲ or ▼. To delete the

digit, press DEL button, or press any numeric key to replace the digit and confirm

with

button. Then the display shows the flashing first letter of the name.

6. Move the cursor to the required position by pressing ▲ or ▼. To delete the letter,

press DEL button, or press any numeric key to replace the name, and confirm with

button, "EMERGENCY ON or OFF" is shown.

7. If the display shows "EMERGENCY OFF", and you want to change it as an

emergency's call dial out, select "EMERGENCY ON " by pressing ▲ or ▼, and

confirm with

button, now "LOCATION" is shown. Select the required location by

pressing ▲ or ▼ and confirm with button, "SAVED!" is shown.

If you select "EMERGENCY OFF" and confirm with

, "SAVED!" is shown.

[Important note: selecting the correct location is very important because this

feature determines in case of emergency sequence of the telephone numbers that

will be dialed in the emergency feature. Location 1 will be dialed first, then 2, then

3 etc.]

[Important note: if you choose to overwrite a location, the previously stored

number will be set to one location “after” the location you just set]

8. You can repeat step 2 to 7 to edit more numbers or press PHONE BOOK to exit.

To Delete the Phone Book Memory

1. Press and release PHONE BOOK button,

icon is shown.

2. Select the required location from the phone book by pressing ▲ or ▼.

3. To delete single memory

, press DEL button once. The display will show the

DELETE?. Press and hold down “DEL” for approx 2 seconds. The telephone

number and name will be deleted and the display will now show another number from

the phone book.

To delete all phone book memories

, press and hold DEL button until the display

shows DELETE ALL?. Press DEL button for 2 seconds until EMPTY appears on the

display.