User's Manual

THE CALLER ID

On each incoming call with available caller ID the telephone will ring and announce the

caller with their name (if a name was recorded associated with a telephone number in

the phone book) or with the telephone number.

Important: When using the Caller ID features, please note it is only available at Caller

ID mode (CLIP icon turns on), if the CLIP icon is off, press PHONE BOOK button once.

Please note that all caller ID features are strictly related to the service provided by the

telephone service provider. In most countries it is necessary to subscribe to the caller

ID service with the telephone service provider.

If the telephone is connected to a PABX the caller ID features depend on the PABX.

The caller ID feature is only possible with the unit powered by the adaptor or by the

backup batteries.

Receiving a Call (the telephone can store up to 64 calls)

• If only the caller's phone number is received, the display shows the caller's phone

number with the time and date it was received. The NEW icon turns on and NEW

CALL LED blinks.

Notes:

1. CALL#01 means this data is stored in Caller ID memory location #01.

2. The calling time and date are immediately recorded from the real-time clock.

• If both the caller's name and phone number are received, the display shows the

caller's name and phone number, with the time and date it was received. The "NEW"

icon turns on and NEW CALL LED blinks.

Note: If the caller's name has more than 16 characters, only the first 16

characters will be displayed.