User's Manual

43
TROUBLESHOOTING
PROBLEM ACTION
The LCD can not be seen
clearly
Modify the contrast setting (see paragraph)
Check your telephone line connection The telephone does not dial
Check the dialing setup (tone or pulse) required in
your country and program the telephone accordingly
(see paragraph)
The telephone is unable to
access the special services
provided by the telecom
operator pressing the R key
Check that the Flash time is set according to the
operator’s standards (see paragraph)
The telephone can not
perform any of the features
Check your AC power supply connection
The telephone does not
perform any of the features
when there is a power in
blackout
Replace the 4 AA batteries in the unit.
Check that while pressing the emergency button on
the pendant the led lights on. Replace the pendant
battery if it does not.
Check that the pendant is within the range of the
telephone and no structural obstacles are in-
between. If necessary change the location of the
telephone
The pendant can not activate
the emergency feature
Check that any additional pendants or new pendants
are correctly paired with the telephone (see
paragraph)
The pendant activates the
emergency feature but no
phone number is dialed with
the emergency message
No phone number in the phone book was
programmed as an emergency number. Please see
above programming sections.
The receiving party can not
hear well during
speakerphone conversation
or during the speakerphone
emergency call
It is necessary to move closer to the telephone and
speak in the direction of the telephone.