User's Manual

TROUBLESHOOTING

You might have programmed VOICE NO in the

menu. Change the setting to Voice YES

The automatic voice feature

does not work

The speaker volume is too low. Increase the

speaker volume

VOLUME

Check that the caller id service is being provided by

your telephone operator

Talking caller id does not

work

For the talking caller ID it is necessary to have

VOICE activated in the programming.

The lcd and the voice

language do not match

Check that in the voice language is set correctly.

Note that not every language on the LCD has a

corresponding Voice language.

In this case, set the VOICE to VOICE NO (see

paragraph)

Reset procedure Reset the unit by removing the power supply, the

batteries and the telephone line for 20 minutes and

then power on again.

This procedure will not erase any of the numbers in

memory or of the user recorded messages.