Network Interface Card User's Manual

Chapter 4 Windows Host Configuration
104
Windows XP/2000 Host Setup
This installation procedure assumes that the NIC adapter is
configured with the correct IP address, subnet mask and gateway
(if required). In addition, the administrator can “ping” and Telnet to
the NIC adapter from the server console. If this is not the case, use
the printer front panel to configure the NIC adapter before
proceeding.
1. For Windows 2000: select Start
Settings Printers.
For Windows XP: select Start
Printers and Faxes.
2. For Windows 2000: double click the Add Printer icon.
For Windows XP: click Add A Printer.
The Add Printer Wizard window displays.
3. Click Next.
4. If necessary, uncheck the Automatically detect and install
my Plug and Play printer box.
5. Click Next.