Network Interface Card User's Manual

Chapter 2 Configuration Tools

• Operation Mode

This is the operation mode of the wireless network. The options

include “Infrastructure” and “Ad Hoc” modes. This must match the

Access Point's configuration.

• SSID Name

This is the Service Set Identifier which must be identical to the

Access Point's SSID name. The SSID name can be configured to a

maximum of 32 alphanumeric characters. The SSID name and

alphanumeric characters are divided into three parts in the control

panel menu as "SSID Name (01-15)", "SSID Name (16-30)" and

"SSID Name (31-32)".

NOTE: When two or more consecutive space characters are used

in the SSID, enclose it in a double quoted string;otherwise

upon resetting the NIC, the SSID Name wil be saved in the

Wireless NIC with only one space.

• Min Xfer Rate

Allows you to set the minimum speed at which the Wireless Option

will accept a connection (in million bits per second).

This is the wireless transfer rate, and can be set to either “enable”

or “disable.” It is set to “enable” when the operation mode is

"Infrastructure" so that the NIC can automatically detect the optimal

transfer rate. If the operation mode is "Ad Hoc" and the transfer rate

is known, the user can enable or disable the corresponding transfer

rate in the menus "Xfer Rate 1Mb", "Xfer Rate 2Mb", "Xfer Rate

5.5Mb" or "Xfer Rate 11Mb".

• Channel

This is the frequency used for wireless communication. The

2.4GHz band spectrum is divided into different channels (1-15). It is

set to "Default" so that the NIC can detect the correct channel to

communicate with the Access Point in infrastructure mode. If the

operation mode is "Ad Hoc" and the channel is known, the user can

set the corresponding channel in this menu.