Network Interface Card User's Manual

Windows Network (NetBIOS TCP/IP)

Default Key

Change the default key number used for WEP encryption.

Authentication Method

Select the desired authentication method to be used when

communicating with an access point.

User

Enter a user name to be used when authenticating with an access

point. Currently only used for LEAP authentication.

Password

Enter the password to be used when authenticating with an access

point. Currently only used for LEAP authentication.

Windows Network (NetBIOS TCP/IP)

TCP/IP is used for Windows (i.e. Windows NT, Windows 95, and

Windows for Workgroups) printing unless another protocol like IPX

is available. Therefore, mandatory TCP/IP settings (i.e. IP address

and subnet mask) are necessary on the NIC. Go to "TCP/IP

Network" on this form to fill in these settings if you haven't done so

already.