Installation Guide

Before installing the in-wall fireplace, please read the following steps carefully.

FOR WALL MOUNTED FIREPLACE STYLE

Remove the four silver colored screws on the top, and take off the wall bracket (See Step 1),Use the screw driver

to drill the wall(See Step 2),Use hammer to put the screws into the wall together with the wall bracket(See Step 3).

ST4*8 Screws

Step 1

Wall bracket

Step 2

Step 3

Lift fireplace and put it onto the bracket, then lock the pre 4 silver screws on the top.

Take off the 2 silver screws on the left side and right side.

Put the plastic tray, and put on the crystal and drift wood fire logs, then lift the glass panel onto the fireplace.

FOR RECESSED FIREPLACE STYLE

Take off the 4 silver screws on the top and then take off the wall bracket from the fireplace (See Step 1).

Take off the 2 silver screws on the left side and right side, then pull out the front glass panel from the fireplace (See Step 2).

Step 1

Step 2

Put the fireplace into the hole, then fix the 2 silver screws as the photo from the inside of the fireplace(See Step 3).

Put the plastic tray, and put on the crystal and drift wood fire logs(See Step 4).

Step 3

Step 4

Wall