Manual

44
• Assembled HyperSport™ 48 RTR
• Spektrum DX3S transmitter
• Boat stand
In addition to the items needed to run the HyperSport 48, we recommend that you carry the
following in your eld box:
Engine Tuning Screwdriver (DYN2775) Clean towels
Extra Propellers (PRB2369) Hex wrench: 2mm, 2.5mm, 4mm
#1 Phillips screwdriver 16mm wrench (2)
8mm wrench Wax
Screw-locking compound
Although the HyperSport™ 48 comes fully assembled and ready for action, you will need a few
additional items in order to run your boat. You will need the following:
Evolution Synthetic 2-Cycle Oil, quart (EVOX1001Q) CA or epoxy glue
Flex Shaft Lubrication (PRB0100) Fuel container
Fuel Pump (HAN155) Gasoline (+87 Octane), ethanol-free
8 AA alkaline batteries (4 for the transmitter and 4 for the receiver)
Contents
Suggested Field Equipment and Supplies
Additional Required Items