Manual

5
 1. There are 4 plywood boat stand pieces.
The 2 short plywood pieces are the ends
of the boat stand.
 2. Secure the 2 long plywood pieces of
the interlocking boat stand to one end of
the short plywood pieces. Repeat with the
remaining short plywood pieces.
 3. Secure the stand together where each
piece is joined with epoxy or CA glue
(not included).
 Unscrew the knurled hatch-mounting
screw from the rear of the hatch. Lift the
hatch from the rear and pull to the rear.
Section 1: Building the Boat Stand
Section 2: Removing the Canopy