Operation Manual

b. If the walking belt slips when walked on, first remove the

key and UNPLUG THE POWER CORD. Using the hex

ey, turn both rear roller bolts clockwise 1/4 of a turn.

When the walking belt is correctly tightened, you should

e able to lift each edge of the walking belt 7 to 10 cm (3

to 4 in.) off the walking platform. Be careful to keep the

walking belt centred. Then, plug in the power cord, insert

the key, and walk on the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION:

a. With the key in the console, press one of the Incline buttons. Whilst the incline is changing, re-

move the key. After a few seconds, reinsert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.