User manual

printed reports. To change the defaults, enter a new operator or

establishment and save by pressing

OK.

QA-510 Tab. This tab is used for three things. Setting the

communications port (COM1-4) to be utilized for initiating the

QA-510 remote setting at start-up. Once entered, it becomes the

default setting. To enter the serial number and firmware version

of the QA-510 utilized for testing. Once entered, it becomes the

default setting, and appears automatically in the headings of

printed reports. To change the default, enter a new serial number

and save by pressing

OK.

3. QA-MAP Tab. Most QA-MAP interaction control settings in-

cluded in the PRO-Soft options may be changed during the exe-

cution of the PRO-Soft QA-MAP Program

. However, the fol-

lowing default settings are only available through the PRO-Soft

QA-510 options menu:

Path:

Path to the QA-MAP file QAMDAT.MDB.

List Equipment Codes:

Controls whether the equipment list window or

the equipment code text box window opens in

the fetch operation.

Fetch from QA-MAP:

- Appliance data

- Sequence

- Procedure

Sets the defaults as to the types of information

extracted from QA-MAP.

Once entered, these become the default settings. To change them,

enter new setting and save by pressing

OK.

4. Report Tab. This tab is for setting the alignment of the print-

outs for the test reports.

5. Interface Tab. This tab is used to configure the PRO-Soft pro-

gram by setting the input and output data files to be used when

interfacing with external programs. Once entered, it becomes the

default setting. To change the default, enter a new COM Port and

save by pressing

OK.

Available separately from your Metron Representative.

2-5