User manual

3. Testing Setup
Communication between the PRO-Soft QA-510 and the QA-510 is
based upon an RS-232C interface, that is standard on most modern
personal computers. The operation is essentially a “master-slave”
configuration, whereby the computer operates the QA-510.
3.1 Equipment Setup
Attach an RS-232 (null modem/data transfer configured) cable to the
9-pin D-sub outlet port located at the rear of the QA-510. Do not at-
tach the printer cable to the QA-510. See below.
NOTE
Some RS-232C cables do
not have any connection
between the seventh and
the eighth wires in the
cable. The cable may still
be called a NULL-modem,
but it will not work with the
QA-510.
3.2 Initializing Remote
Control
1. Before initiating remote control, ensure that:
• the RS-232C cable is securely connected to the communica-
tion ports on the QA-510 and your computer, and;
• the proper communications port has been assigned.
2. With the QA-510 switched ON, advance to the Second Main
Menu Bar by pressing more-2 (F5):
3-1