User manual

5. Checklists
The checklist adds manually or visually performed tests and function
checks to the protocols (see Chapter 7). Once created, a checklist can
be edited, stored and retrieved for future use.
5.1 Checklist Form Win-
dow
From the PRO-Soft QA-510 Main Menu select
Form, Checklist.
The Checklist Form Window then appears (see below). It is a table
allowing for up to 30 lines, where each line contains a description of
what to examine (up to 50 characters). Each line also has two check
boxes, 'Pass' and 'Fail,' to be used when examining the infusion
pump.
Form
Sequence F2
Checklist F3
Protocol F4
5.2 Checklist Files Man-
agement
File
New Ctl+N
Load... Ctl+L
Save... Ctl+S
Save As... Ctl+A
Delete...
Print... Ctl+P
Exit
1. New Checklist. Select
File, New. The current checklist window
clears and initializes a new checklist form. If you already have an
active checklist containing unsaved changes, a dialog box ap-
pears. It prompts you as to whether or not you want to save the
changes, discard them, or abort the operation and return to the
active checklist.
2. Loading and Saving Checklists. To save the active checklist,
select
File, Save or File, Save As. The Checklist Library win-
dow will open (see below), prompting for a name to use for the
checklist. To retrieve, select
File, Load and select among the
available checklists:
5-1