User manual

APPENDIX A: AUTO SEQUENCE CODES
A1 Auto Sequence Dialog
Box
This dialog box (see figure below) contains a string of codes, de-
veloped from the following tables. Conventions for constructing
the string are:
a. There are no spaces between codes in the string.
b. The Load Sequence in position ( “
Q__” ) is followed in all
cases by a colon.
c. Each code inserted is followed by a comma ( “
,” ).
d. The last code is always End of sequence ( “
E” ), with no
punctuation thereafter.
Description of above auto sequence: Load Auto Sequence in posi-
tion 01, Make: Novametrix, Ambient light: Normal, Pigment: Low,
Preset: Normal, Wait for user to press advance, Preset: Weak Pulse,
Wait for user to press advance, Preset: Bradycardia, Wait for user
to press advance, Print Header, Print Status, End Auto Sequence.
A2 Auto Sequence Con-
trol Codes
Q = Load Auto Sequence in position “nn” (Example: “Q01” = Load
Auto Sequence in position 01).
E = End Auto Sequence
H = Print Header
I = Enter Alarm Limits Test Mode
K = Wait for user to press advance
W = Print status
A-1