Owner`s manual

4. 4
.
Slide the Brace (29) onto the threaded bolt protrud-
ing from the Tower Frame (10). Thread a 3/8"
N/lock Nut (6} onto the threaded bolt. Do not fight-
en the Nylock Nut yet.
Placeyour foot on the extensionand slightlyraise
the _ont of the Tower Frame (10). Align the lower
end of the Brace (29) with the indicated 3/8" x
2 1/2" Carriage Bolt(1). Lowerthe Tower Frame so
the Brace slidesontothe Carriage Bolt.Thread a
3/8" Nut (2) with a 3/8" Lockwasher(3) onto the
Carriage Bolt. Do not tighten the Nut yet.
With the helpof a secondperson,lift the Upright (9)
and lower itonto the two indicated 3/8" x 2 1/2"
Carriage Bolts (1) in the Rear Bose (8). Thread a
3/8" Nut'(2) and 3/8" Lockwasher(3) onto each
Carriage Bolt. Do not tighten the Nuts yet.
Attach the FrontBose (7) to the Upright (9) with two
3/8" x 3/4" Bolts (31).
Tighten the 3/8" Nylock Nut (6) attached in assem-
bly step 4, and the seven3/8" Nuts (2) attached in
assembly steps3 through 5.
6. Attach the Foot Plate(102) to the Upright (9) with
two 3/8" x 3/4" Bolts (31) and 3/8" N/lock Nuts
(61.
With the help of a secondperson, lift the FrontBase
(7). Peelthe backing off three Rubber Pods (48).
Presstwo onto the underside of the Front Base in the
indicated locations, and one onto the underside of
the Upright (9). Lower the Front Bose.
Presstwo Rubber Pads(48} onto the Rear Base(8)
in the some manner.
6
48 7
102
9
9
6
4