Owner`s manual

10. Wrap theWeight Cable (52) around a 2" Pulley(4).
Attach thePulley to the RightArm (16) with a 3/8", x
1 3/4" Bolt(40) and 3/8" Nylock Nut (6).
Laythe Weight Cable (52) over a 3 1/2" Pulley(5).
Attach a CableTrap (67) and thePulleytotheside
of the Upright (9) with a 3/8" x i 3/4" Bolt(40)
and 3/8" N/lock Nut (6). Make surethat theCable
Trap isin the "12 o'clock" position.
11. Wrap the Weight Cable (52) under a 2" Pulley(4).
Attach the Pulleyto the bracket on the sideof the
Moment Arm (74) with a 3/8" x 1 3/4" Bolt(40)
and 3/8' Nylock Nut (6). Make surethat the Weight
Cable isbetween the Pulleyand the indicatedpin.
Attach the end of the Weight Cable (52) to the right
side of the LegDeveloper(23) with a 3/8" x 2 1/4",
Bolt(45) and 3/8" Nylock Nut (6). Do not overtight-
en the Nylock Nut, the Cable mustbe able to swiv-
el freely or it will be damaged.
] 2. Insertthe threaded bolt on the end of the Weight
Cable (52) intothe AdjustmentBracket(53). Thread
the 5/16" Nut (82) exadty two completeturnsonto
the threaded bah.
13. Wet the upper ends of the Leftand RightArms(15,
16) and the insidesof the two LargePads(17) with
soapy water. Slide the Large PadsontotheArms.
Attach the Backrest (19) to theUpright (9) with two
1/4", x 2 1/2, Bolls (46).
10
11
12
13
0
:" _"_46
5
6