INSTRUCTIONS FOR USE Pro-Ject Pre Box
Dear music lover, thank you for purchasing a PRO-JECT AUDIO preamplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors ! Make all connections whilst the preamplifier is disconnected from the power supply. ! Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.
Remote control 1 ON/OFF ON/OFF turns the unit on or back into standby. The blue LED on the front panel shows that the unit is powered on. CH+ 0_ and 0_ and VOL VOL+ VOL- CH CH- 0 adjust the sound volume 0 select the inputs VOL + CH + Front panel controls 1 Power Volume 2 Input Select Pre Box Stand-By The switch marked Power on the front turns the unit on or back into standby. The blue LED on the front panel shows that the unit is powered on.
Replacing batteries Proceed as follows: • • Unlock and slide open the battery case cover Replace the battery. Make sure the battery is the right way round ! • Close the battery case cover Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugstores.