INSTRUCTIONS FOR USE Pro-Ject Stereo Box
Dear music lover, thank you for purchasing a PRO-JECT AUDIO amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Help to protect the environment If you are not going to use the amplifier for an extended period of time, e.g. vacation, we suggest to disconnect it from the AC mains.
Remote control 1 ON/OFF ON/OFF turns the unit on or back into standby. The blue LED on the front panel shows that the unit is powered on. CH+ 0_ and 0_ and VOL VOL+ VOL- CH CH- 0 adjust the sound volume 0 select the inputs VOL + CH + Front panel controls Volume 1 2 Input Select Power Stereo Box Stand-By The switch marked Power (press and hold to switch into standby mode) on the front panel turns the unit on or back into standby.
Replacing batteries Proceed as follows: • Slide open the battery case cover • Replace the battery. Make sure the battery is the right way round • Close the battery case cover Battery type: 1 x CR 2032 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugstores.
