Owners manual

PRO SERIES GOOSENECK
PRO SERIES GOOSENECK
INSTALLATION INSTRUCTIONS
WARNING!
Maximum Trailer Weight - 25,000 lbs.
Maximum Tongue Weight - 6,250 lbs.
DO NOT EXCEED THE MANUFACTURERS GVWR
FOR YOUR VEHICLE.
1. Place base rails across truck bed. Place gooseneck on base rails to establish spread between rails and install base rail
mounting kit 30439 or 30035 per base rail kit instructions.
2. Install gooseneck on base rails (can be installed in either the rear or forward position, make sure ball is not BEHIND axle
center).
3. For best towing, install gooseneck so ball is over or in front of the tow vehicle axle center.
4. Install pull pins and lock in place with spring cotter pins.
5. When attaching the safety chains, secure them through the slots on the sides of the gooseneck plate.
CHECK THIS HITCH PERIODICALLY TO ENSURE THAT ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL
COMPONENTS ARE SOUND.
For Installation Assistance or Technical Help,
Call 1-888-521-0510
Base rails sold
separately
49080IN 16AUG07B PCN9683 ©2007TOWING PRODUCTS, INC Litho in USA

Summary of content (3 pages)