User Manual

Chevrolet 73 to 87 / 73 to 92 4-door (GMC) (34” Straight, with Outside Shock

Absorbers)

CAUTION!

Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!

1/4 1.5-3

1/4 2

34 7/8” Long Box

And Short Box

Side Bracket

Front

Vehicle

Rear Edge of

Truck Bed

* Optional weld

pattern

Drivers side of 1/2 ton Chevy Long Box Shown

King Pin Center approx.. 3 1/2”

forward of Axle Center

DO NOT Torque to 85lb-ft

(tighten but do not crush bed sill)

Install spacer with 1/2” hole between frame and

bed. (Cut provided tube spacer down to fix snug

between frame and bed.)

Drill through

bed and truck

frame

Long bracket

Measure from Rear Edge of truck

bed to rear edge of base rail.

ROW 1

ROW 2

ROW 3

ROW 4

Axle Center

Bed Sill

Each base rail must have a

bolt in either of the marked

center holes. Check for

obstructions before drilling.

CAUTION!

Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.

Cequent Towing Products does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the

responsibility of the installer to prevent damage due to installation.