User Manual

Chevrolet 73 to 87 / 73 to 92 4-door (GMC) (34” Straight, with Inside Shock Absorbers)

CAUTION!

Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!

34 7/8” Long Box

and Short Box

Side Bracket

Front

Vehicle

Rear Edge of

Truck Bed

* Optional weld

pattern

Drivers side of 1/2 ton Chevy Shown

King Pin Center approx.. 3 1/2”

forward of Axle Center

1/4 1.5-3

1/4 2

DO NOT Torque to 85lb-ft

(tighten but do not crush bed sill)

1/4 2

Long bracket

Measure from Rear Edge of truck

bed to rear edge of base rail.

Short bracket

ROW 1

ROW 2

ROW 3

ROW 4

Axle Center

Bed Sill

CAUTION!

Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.

Cequent Towing Products does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the

responsibility of the installer to prevent damage due to installation.

Each base rail must have a

bolt in either of the marked

center holes. Check for

obstructions before drilling.