User Manual

DODGE ‘94 to ‘01 1500 / ‘94 to ‘02 2500/3500 (FULL SIZE, SHORT AND LONG BOX)

CAUTION!

Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!

IMPORTANT NOTES FOR THIS INSTALLATION:

1. It is very important that brackets in Row 2 are against forward side of bed sill as shown below. Due to

dimensional instability in bed sill placement with the Dodge truck, interference could result when drilling in Rows 3

or 4. May need to move base rail location +/- 1/2” to ensure frame brackets do not interfere with bed sills.

32 7/16” Long Box

28 7/16” Short Box

Side Bracket

Axle Center

Front

Vehicle

Rear Edge of

Truck Bed

1/4 1.5-3

1/4 2

* Optional weld

pattern

Drivers side Ram 1500 Shown

Measure from Rear Edge of truck

bed to rear edge of base rail.

Long bracket

Short bracket

ROW 1

ROW 2

ROW 3

ROW 4

King Pin Center approx. 2”

forward of Axle Center

Bed Sill

Each base rail must have a

bolt in either of the marked

center holes. Check for

obstructions before drilling.

CAUTION!

Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.

Cequent Towing Products does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the

responsibility of the installer to prevent damage due to installation.