Spec Sheet

11/17
Pump Features and Construction Specications and Dimensions
Flow Chart
Mix and Match Ordering
Available from:
• Cast iron construction
• Energy efficient permanent split
capacitor (PSC) motor
• Cast iron vortex impeller
• Thermally protected
• Stainless steel fasteners
• Pumps up to 1/2” solids
• Removable strainer
• Upper and lower sealed ball bearings
•
Carbon ceramic seal plus (1)
Buna-N-Seal
• Cast iron vortex impeller
• 10' Pump cord
Switches and Controllers Comparison
Flow @ 0 ft. Head
Flow @ 10 ft. Head
Max Head
Strainer
Discharge
Motor HP/Type
Voltage
Amp. Draw @ 10 ft. Head
4300 GPH/ 71.6 GPM
3600 GPH/ 60 GPM
32 ft. (9.8 m)
Removable Polycarbonate
1.5” (3.8 cm.)
1/2 HP - PSC Motor
115 VAC, 60 Hz
6.0 Amps
Width
Depth
Height
Weight
8.5” (21.6 cm)
6.5” (16.5 cm)
12” (30.4 cm)
22 lbs. (9.9 kg)
Why Pro Series Pumps?
You have flexibility to order any pump with any switch
• Option 1 - Order a pump and a switch as separate items
• Option 2 - Order as a pre-packaged system with any switch in a
single carton, ready for delivery
Premium Components
• Designed for higher pumping capacities, increased energy
efficiencies, resulting in proven reliability
• Industrial grade, built for the residential market
• PSC motors
• Upper and lower ball bearings
Energy Savings
•
The S2 Series saves an average of $45 per year (Based on an
average sump pump run time of five minutes per hour for one
year.The estimated average of a 1/3 HP shaded pole motor is
9.5 Amps. Average electric cost per-kilowatt-hour is $0.12)
Exceeding Expectations
• Patented switches and controllers with state-of-the-art
monitoring systems
• “Good, Better, Best” offering allows for a wide range of
products to best fit your needs
On the Forefront of Technology
• Many of the models within the PHCC Pro Series line have
a USB Data Port and Remote Terminal which allows for
connection to an external device that can notify a home
owner of a problem or needed maintenance while away
from home
• Receive text, email, or in-app notifications while away
from home
System operating light (flashes)
Universal controller mounting tabs
Activates pump weekly to exercise and
extend pump life
Adjustable run time from 5-45 seconds
after the float drops
Float switch can be unplugged from
controller for easy installation
Includes: Switch, manual and stainless steel hose clamp
Piggy-back plug
10' float switch cord
DFC1
DFC1.5
VSC1.5
TSC1.5
DFC2
VSC2
TSC2
Standard Enhanced Deluxe
Remote Notification Connections:
(Allows for connection to external devices)
USB Data Port (Can send specific email,
text, or In-App notifications to your phone,
tablet or computer)
Remote Terminal (Allows for basic alerts
via text, email, In-App, home security, or
other dry-contact based device)
Sounds an alarm and alerts when:
Available with Tether Switch
Available with low voltage Vertical Switch
Available with Dual Float Switch
9V battery is low or slide switch is off
AC power has failed
Pump or float problem is detected
2' power cord
4' power cord
High Water Accessory Available
Primary Sump Pump - S2050