Instruction manual

FACILITY REQUIREMENTS:
Before installing the TYTAN inline water heater confirm the facility requirements listed
below.
Space Requirements:
The TYTAN inline water heater is constructed in a wall-mounted or freestanding
enclosure. The dimensions of this enclosure are based upon the wattage of the unit.
This enclosure includes the common framework for the heating column(s) as well as the
electrical components.
The enclosure requires adequate ventilation. Locate equipment so that ventilation
provisions on the bottom and sides of the enclosure are not obstructed. The ventilation
fan exhausts air through these openings which prevents overheating of the interior. Be
sure to provide adequate clearance for normal operation and maintenance of this
heater.
The standard dimensions of the various models are shown in Table 3 (see appendix for
custom made units). Allow additional space on all sides of the unit for the control
ventilation and service access. (all dimensions are in inches).
Figure 5: Clearance Dimensions for Wall-Mounted Units (72kW Model Shown)
M-45-02 TYTAN Manual
Revision - Date: 01 – 11/16/07
13