Instruction manual

INSTALLATION:

NOTE: The mounting and installation of this unit should only be performed by

qualified personnel.

Inspection and Uncrating:

The wall-mounted TYTAN units are shipped in a horizontal position. The free-standing

TYTAN units are shipped in a vertical position.

Due to the weight of the unit, DO NOT

ATTEMPT to move or lift the unit without the

appropriate material handling equipment.

1) Inspect the shipping crate for evidence of damage. If any damage is detected,

contact the carrier immediately.

2) Inspect the shock sensors located on the outside of the crate. The shock sensors

will indicate if the unit experienced rough handling. If the sensors indicate that the

unit has experienced rough handling, contact the carrier immediately. If the shock

sensor on the outside of the crate is missing, there is also a shock sensor located on

the inside of the crate.

Figure 6: Shockwatch Sensor

M-45-02 TYTAN Manual

Revision - Date: 01 – 11/16/07