Instruction manual

INSTALLATION (Continued):
Uncrating the wall-mounted units:
3) Remove the top of the crate.
4) Remove any protective packaging material and any other materials that may have
been packed in the crate with the enclosure.
5) Remove any braces used to hold the unit in place during shipping.
6) Using a hoist or other suitable lifting device, lift the unit from the mounting holes on
the side flanges and remove from the crate. Do NOT lift the unit by holding the
plumbing connections or (if present) the disconnect handle.
Uncrating the free-standing units:
3) Remove the front of the crate.
4) Remove any protective packaging material and any other materials that may have
been packed in the crate with the enclosure.
5) Remove any braces used to hold the unit in place during shipping.
6) Using a hoist or other suitable lifting device, lift the unit from underneath and remove
from the crate. Do NOT lift the unit by holding the plumbing connections or (if
present) the disconnect handle.
Do not tip the unit beyond 10° from vertical.
Serious personal injury or equipment damage
may result.
M-45-02 TYTAN Manual
Revision - Date: 01 – 11/16/07
16