Instruction manual

OPERATIONS:
Control Panel:
Figure 14: Temperature Controller and Control Panel.
The TYTAN Heating System incorporates a self-tuning, PID microprocessor based,
digital temperature controller with a set high temperature alarm. The PID feature
enhances the controller's ability to reach and maintain a constant process temperature.
The self-tuning feature enables the controller to measure the process characteristics
and indicate desired values, which can be displayed on LED displays.
The following sections provide a description and instructions for two available
temperature controllers:
1. The Omron E5CN Controller. This is the temperature controller used on standard
Tytan heaters. For a complete user guide, visit the Omron website;
www.omron.com.
2. The Omron E5CK Controller. This is the temperature controller used on Tytan
heaters with the RC1, RC2 or RC3 options. For a complete user guide, visit the
Omron website;
www.omron.com
These two temperature controllers program differently, and have slightly different control
settings. Be sure to refer to the correct temperature controller section when
programming your unit.
M-45-02 TYTAN Manual
Revision - Date: 01 – 11/16/07
25