Instruction manual

OPERATIONS for E5CN (Continued):
Display Symbols:
Operation Indicators:
ALM1: Illuminates when the alarm 1 setting is ON (tripped) (120°C).
ALM2: Illuminates when the alarm 2 setting is ON (tripped) (110°C).
ALM3: Not available on this controller.
HA: Not available on this controller.
OUT1: Illuminates when the control output 1 is ON.
OUT2: Illuminates when control output 2 is ON (Not used).
STOP: Illuminates when the control operation has stopped.
CMW: Illuminates when communications wiring is enabled.
: Illuminates when setting change protection is ON.
MANU: Illuminates when the controller is in Manual operation mode.
The following tables show the correspondence between symbols shown on the No.1
and No.2 displays and alphabetic characters.
Figure 16: Omron Temperature Controller Display Symbols
M-45-02 TYTAN Manual
Revision - Date: 01 – 11/16/07
27