Instruction manual

OPERATIONS for E5CK:
Temperature Controller E5CK:
This section contains information for the E5CK
controller only. Do not use these instructions
for any other temperature controller, or
controller damage may result.
The Omron E5CK temperature controller is used on Tytan heaters that utilize the RC1,
RC2 or RC3 options. For units with these options, refer to this section (E5CK
controller). Do NOT use the section for the E5CN controller
Figure 17: Omron Temperature Controller
DISPLAY FEATURES:
No. 1 display (PV): Shows the process value (outlet temperature), modes and
parameter symbols.
No. 2 display (SV): Shows set points, parameter setting and the manipulated variable
heat.
M-45-02 TYTAN Manual
Revision - Date: 01 – 11/16/07
32