Instruction manual

OPERATIONS for E5CK (Continued):
A/M key: Switches the controller between auto and manual operation.
Display key: Allows selection of the mode when depressed for more than 1 second.
Switches parameters when depressed for less than one second.
Up and Down arrow keys: Advances, increases or decreases the setting or values in
the No. 2 display.
OUT1: Illuminates when the controller’s heat output is ON.
OUT2: Illuminates when the alarm 1 setting is ON (tripped).
SUB1: Illuminates when the alarm 2 setting is ON (tripped).
MANU: Illuminates when the controller is in Manual operation mode.
STOP: Illuminates when the control operation has stopped.
RMT: Illuminates when in Remote operation.
AT: Flashes during auto-tuning.
Display Symbols:
The following tables show the correspondence between symbols shown on the No.1
and No.2 displays and alphabetic characters.
Figure 18: Omron Temperature Controller Display Symbols
M-45-02 TYTAN Manual
Revision - Date: 01 – 11/16/07
33