Owner`s manual

6. Place the assembled fireplace on the middle where it is 27” from the corner and form a 45 degree

angle to each side wall. Move the assembled surround to the corner, with side panels close to side

walls. Move the fireplace to where it can properly attach the surround.

7. Turn up the back of mantel top, the special spring will lock the rear mantel top in position, then use

14 screws to secure bracket as show in Figure 5 make sure the front and rear mantel top are in the

same level.

8. Move the surround back. Set surround top on top of mounting strips and mantel front. After properly

installing the top, attach surround top to mounting strip using finishing nails.

9. Push the base to the bottom of surround, close to the right and left sides.

10.Install fireplace per Homeowner’s Installation Manual.

Figure 5

Figure 6

Figure 4