Operating instructions

SET CROP LIGHTING

The SET CROP LIGHT mode allows the grower to set time delays, solar levels, and other criteria for the crop

lighting outputs.

1. Enter the SET CROP LIGHT mode.

2. Use the PRIOR-NEXT switch to advance to the desired item to set.

3. Use the VALUE switch to toggle between desired choices that the system has internally provided.

Crop Lgt 1

(ON at All Levels)

Set the desired light level at which the crop lighting output should energized. If light level is not a factor, select ON

at All Levels.

Crop Lgt 1

Delay (5 Min.)

This will be the time delay that the system must see in order to energize or de-energize. This will be the amount of

time that the solar level must maintain in order to turn on or off the lights.

Crop Lgt 1

Diff. (3) KLUX

This is the light level differential of the crop lighting system. This is the amount of light that is necessary in order to

cause a change in the system.

Crop 1 1st ON

(At) 6:00 PM

This is when the crop light will be initially be activated. You can select one of the following: at a specified time,

after/before sunset, or after/before sunrise.

Crop 1 1st OFF

(At) 6:00 PM

This will be the off time. You can select one of the following: after running a pre-set period of time, after/before

sunset, or after/before sunrise.

Crop 1 2nd ON

(Not in Use)

This allows you to set the second operational time for crop lighting, if desired.