User Manual

10
Press and hold MODE button and the following utility menu will appear:
Use and buttons to browse the options, press button to select an option.
Recently reconnection: selecting this option the media player tries to reconnect the latest
Bluetooth device connected.
EQ: selecting this option the following menu will appear.
In this menu you can choose an equalization for the audio files to be reproduced: Normal, Pop,
Rock, Jazz, Classic, Country, Bass enhance.
After an EQ setting has been chosen, a small icon in the main screen will show the choice.
Deleted paired info: selecting this option the information about any Bluetooth device previously
paired with the media player will be cancelled. Try this option if you have problems to set a new
BT connection.
Device Information: selecting this option the following info screen will appear, showing the
name and address of the FREE6LT Bluetooth receiver.
Exit: returns to the main screen.
To start a USB recording: select JACK INPUT by pressing MODE button. Then, only if a valid USB
drive is plugged into the system, you can start the recording.
Press the button to record and press again the button to pause or restart the recording.
Press the button to stop the current recording: then if you press again the button a new
recording will start.
Press MODE… Press to record… Press to finish.
NOTE: the audio files are recorded in a folder named “RECORDL”, as RECxxxL.MP3 (stereo, bitrate
96K) where xxx is the sequential number of the recording.