Manual

Installation Procedure
PLC Ladder Monitor Operation Manual
1-4
1.3 Installation Procedure
• GP-Pro EX Manual and the Hardware Manual are available for download on
the Pro-face support site “Otasuke Pro!” (http://www.pro-face.com/otasuke/).
See the manual for GP-Pro EX Ver.2.00 or later.
Create a project file
Install the startup file
onto a CF Card
1
Install the add-on kit
2
)
“2.2.2 Setup Procedure” (page 2-4)
3
See:
GP-Pro EX Reference Manual
4
Configure the
device monitor
)
“2.2.2 Setup Procedure” (page 2-4)
5
Transfer the project
file with the device
monitor settings to
the display
See:
GP-Pro EX Reference Manual
6
Install the CF Card
See:
GP3000 Series Hardware Manual
7
Connect the display
and PLC
See:
“Mitsubishi Electric Corporation A Series CPU Direct Driver”
or “Mitsubishi Electric Corporation A/AnA Series Ethernet
Driver” in “GP-Pro EX Device Connection Manual”
)
“2.2.2 Setup Procedure” (page 2-4)
8
Start up the Ladder
Monitor feature
)
“2.2.2 Setup Procedure” (page 2-4)