Manual

PLC Ladder Monitor Operation Manual 3
 Supporting Connected Devices
Maker
Series
Name
CPU
Model
Link I/F
Communication
method
*1
*1 Communication mode changes according to type of link unit, cables used, etc. For
details, see the relevant driver manuals.
Device PLC
Names on GP-
Pro EX
(Version)
*2
*2 The driver version can be checked by viewing [Peripheral List] in the [System Settings]
window on the GP-Pro EX, or [Driver Version] on [Offline Home] on the display.
Mitsubishi
Electric
Corporation
Q series
(A Mode)
Q02CPU-A
Q02HCPU-A
CPU Direct
RS-232C or
RS-422/485
(4wire)
Mitsubishi Electric
Corporation
A series CPU
direct
(V1.13.02 or later)
A1SJ71C24-R2
A1SJ71C24-R4
A1SJ71UC24-R2
A1SJ71UC24-R4
Mitsubishi Electric
Corporation
A Series Computer
Link
(V1.12.02 or later)
AnA
Series
A2ACPU
A2ACPU-S1
A3ACPU
A2UCPU
A2UCPU-S1
A3UCPU
A4UCPU
CPU Direct
RS-232C or
RS-422/485
(4wire)
Mitsubishi Electric
Corporation
A series CPU
direct
(V1.13.02 or later)
AJ71C24-S6
AJ71C24-S8
AJ71UC24
Mitsubishi Electric
Corporation
A Series Computer
Link
(V1.12.02 or later)
A2USCPU
A2USCPU-
S1
CPU Direct
RS-232C or
RS-422/485
(4wire)
Mitsubishi Electric
Corporation
A series CPU
direct
(V1.13.02 or later)
A1SJ71C24-R2
A1SJ71C24-R4
A1SJ71UC24-R2
A1SJ71UC24-R4
Mitsubishi Electric
Corporation
A Series Computer
Link
(V1.12.02 or later)
• If the driver version of a device connected to the GP-Pro EX is older than
that indicated in the table, the ladder monitor will not function normally. You
must upgrade the driver to at least the version indicated in the table before
using the unit. For the update module, please download it from the Pro-face
support site “Otasuke Pro!”.
(URL http://www.pro-face.com/otasuke/)