Manual

ManualsBrandsProform ManualsFitness & ExerciseOfficial Proform edge 4001 weight system

Senal Number Decal

QUESTIONS?

As a manufacturer, we are

committed to providing you

complete customer satisfac-

tion. ff you have questions,

or find there are missing or

damaged parts, we will

guarantee you complete

satisfaction through direct

assistance from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL

DIRECT TO OUR TOLL-FREE

CUSTOMER HOT LINE.

The trained technicians on

our Customer Hot Line will

provide Immediate assist-

ance, free of charge to you.

CUSTOMER HOT LINE:

1;800-999.3756

Mon.-Fri., 6 a.m.-6 p.m. MST.

CAUTION:

Read all safety precautions

and instructions in this man-

ual carefully before using

this equipmenL Save this

manual for future reference.

PRO.FORM"

TRAINING SYSTEM

OWNER'S MANUAL

SOLD BY SEARS, ROEBUCK AND CO., CHICAGO, IL 60684

Summary of content (12 pages)

PAGE 1
PRO.FORM" TM TRAINING Senal Number SYSTEM Decal QUESTIONS? As a manufacturer, we are committed to providing you complete customer satisfaction. ff you have questions, or find there are missing or damaged parts, we will guarantee you complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our Customer Hot Line will provide Immediate assistance, free of charge to you.
PAGE 2
TABLE OF CONTENTS Important Safety Precautions ....................... 2 Before You Begin ................................ Assembly ....................................... Operation and Adjustment ......................... Maintenance and Trouble-Shooting .................. Exercise Guidelines .............................. Part List ........................................ Exploded Ordering Warranty Drawing 3 4 5 7 8 10 ............................... .- 11 Replacement Parts ................ .....
PAGE 3
BEFORE YOU BEGIN Congratulations for selecting the Pro Form EDGE 4001 Multi-Dimensional Training System. The unique EDGE 4001 is a total body conditioning system, offering both weight training and aerobic exercises. Moving from station to station on the EDGE 4001 is quick and easy, and the digital hand control allows you to change weight with the touch of a button.
PAGE 4
ASSEMBLY Two persons are recommended in order to assemble the system. Set all parts in a cleared area. Make sure that all parts are Included before disposing of the packing materials. Read each step carefully before beginning. Assembly can be completed using a standard screwdriver and two adjustable wrenches (not included). Press a Front Stabilizer Endcap the front stabilizer of the Frame Extension (47) onto the Frame, Attach the Base Extension with . (70) onto each side of (1).
PAGE 5
° Liberally grease the Press Arm Axle (10). Align the holes in the Press Arm (12) with the holes in the Moment Arm (13). Insert the Press Arm Axle through the Press Arm and Moment Arm. 5 grease Using a standard screwdriver, turn the Press Arm Axle (10) until the hole in the Axle is aligned with the hole located at the front of the Moment Arm (13). Tighten the Press Arm Axle Bolt (11), Lockwasher (78) and Washer (66) into the Moment Arm and Press Arm Axle.
PAGE 6
ATTACHINGAND REMOVINGTHE SEAT SUPPORT The seat supportshould be attachedto the system/asdescribedin the assemblyinstructions. For certainexercises,the seat supportmust be removed. First, removethe lower cable from the leg lever. Then, lift the seat supportuntilthe bracketon the seat supportis free of the pins on the frame. ATTACHINGTHE LEG LEVERTO THEWEIGHTSYSTEM Toattachthe leg leverto the weight system,attach the cable extensionbetweenthe leg lever andthe lowercable with two connector links. (See fig.
PAGE 7
ATTACHINGTHE ABDOMINAL STRAPTO THE WEIGHT SYSTEM The abdominalstrapis designedto be usedwith the middle cable. Remove any attachments from the middle cable. Attach the abdominal strap to the middle cable with a connector link. ATTACHING THE ANKLE STRAP The ankle strap is designed to be used with the lower pulley. Remove any attachments from the lower pulley. The cable extension can be attached between the ankle strap and the lower cable with two connector links.
PAGE 8
LUBRICATING THE BU'I-I'ERFLY ARMS AND PRESS ARM The butterfly armsand press arm should be lubricated every six months with a petroleum-based grease. To lubricate the butterfly arms, remove the hairpin cotter pins and slide the butterfly arms off of the frame. Grease the bushings in the butterfly arms. Re-attach the butterfly arms with the hairpin cotter pins. To lubricate the press arm, an adjustable wrench is required. Remove the bolt, Iockwasher and washer from the lower end of the moment arm.
PAGE 9
CARDIOVASCULARCONDITIONING The leg lever,lat bar and press bar can be used for an excellent cardiovascular workout. Set the .... -weight at the lowest setting and do as many repetitions and sets as desired. For an effective cardio,iascular workout, your heart rate should be kept at a level between 70% and 85% of your maximum heart rate. This is your "training zone." You can find your training zone by consulting the table below.
PAGE 10
PART LIST-Model No. 831.157032 Rev.11 91 Key No. Part No. Qty. Frame Rear Stabilizer Endcap NylockNut 3/8" x 3.50" Bolt 3/8" x 1.75" Bolt 3/8" x 2.00" Bolt 1/4" x 2.
PAGE 11
EXPLODED DRAWING- Model No. 831.157032 t--_\ Specifications are subject Rev.11/91 to Change without notice.
PAGE 12
ORDERING REPLACEMENT PARTS Each EDGE 4001 System has its own MODEL NUMBER. Always mention the MODEL when requesting service or repair pads for your EDGE 4001. NUMBER All pads listed herein may be ordered through SEARS, most SEARS RETAIL STORES. CENTERS ROEBUCK AND CO. SERVICE If pads you need are not stocked locally, your order will be electronically PARTS DISTRIBUTION CENTER for expedited handling. WHEN ORDERING 1. The MODEL REPAIR PARTS, ALWAYS NUMBER GIVE THE FOLLOWING NUMBER 4.