Manual

ATTACHINGAND REMOVINGTHE SEATSUPPORT
Theseat supportshouldbeattachedto the system/asdescribedinthe assemblyinstructions. For
certainexercises,the seatsupportmust be removed. First,removethe lowercablefrom the leg lever.
Then,liftthe seatsupportuntilthe bracketon the seatsupportis free of the pins onthe frame.
ATTACHINGTHE LEG LEVERTO THEWEIGHTSYSTEM
Toattachthe legleverto theweightsystem,attachthecable
extensionbetweenthe leg lever andthe lowercable with two
connector links. (See fig. 1)
ATTACHING THE LAT BAR TO THE WEIGHT SYSTEM
To attach the lat bar directly to the lower cable, first disconnect
the cable extension from the leg lift. Remove the seat support
from the frame as described above. Attach the lat bar to the
cable extension using a connector link. (See fig. 2)
To use the lat bar with the middle or upper cable, the chain
must be attached between the lat bar and the cable using the
two connector links. The chain can be shortened by attaching
the connector links closer together along the chain. IMPOR-
TANT: The proper length of chain between the lat bar and
the upper cable should be determined by the exercise to
be performed. Adjust the length of chain until the lat bar
is in a comfortable starting position. (See fig. 3, 4)
6
ATTACHING THE ROWER BAR TO THE WEIGHT SYSTEM
The rower bar should be attached to the weight system in the same manner as the lat bar. See
ATTACHING THE I_AT BAR TO THE WEIGHT SYSTEM above. (See fig. 2-4)