www.proform.com Model No. PFEL89909.4 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: Please register this product (see the limited warranty on the back cover of this manual) before contacting Customer Care. CALL TOLL-FREE: 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–4 p.m. MT ON THE WEB: www.proformservice.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. 9.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® 990 CSE elliptical. The 990 CSE elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. For your benefit, read this manual carefully before you use the elliptical.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included.
ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • In addition to the included tool(s), assembly requires the following tools: • Assembly requires two persons. one Phillips screwdriver • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. one adjustable wrench • To identify small parts, see page 5. Assembly may be easier if you have a set of wrenches.
2. Orient the Front Stabilizer (3) so that the small welded tubes are facing away from the Main Frame (1). 2 Attach the Front Stabilizer (3) to the Main Frame (1) with two M10 x 95mm Screws (100). Welded Tubes 100 3 1 3. Orient the Upright (5) and the Top Cover (27) as shown, and slide the Top Cover upward onto the Upright. 3 Wire Tie Have a second person hold the Upright (5) and the Top Cover (27) near the Main Frame (1). Avoid pinching the Wire Harness (60) Locate the wire tie in the Upright (5).
4. Apply a generous amount of the included grease to the Upright Axle (48) and to two Wave Washers (118). 4 60 102 Tip: Avoid damaging the Wire Harness (60). Insert the Upright Axle (48) through the Upright (5) and center it. Slide a Wave Washer (118) onto each side of the Upright Axle. Avoid damaging the Wire Harness (60) 95 Grease 118 48 Next, identify the Right and Left Upper Body Legs (6, 7), which are marked with “Right” and “Left” stickers, and orient them as shown.
6. See drawing 6a. Locate the Pedal Arm Roller (32) on the Right Pedal Arm (12). Set the Pedal Arm Roller on the Ramp (130). 6a See drawing 6b. Apply grease to the axle on the right Crank Arm (39). Orient a Pedal Arm Sleeve (46) so that the flat side is facing the elliptical. Slide the Pedal Arm Sleeve onto the axle on the right Crank Arm (39). Attach the Pedal Arm Sleeve with an M8 x 25mm Screw (121), a Large Axle Cover (113), and an M8 Washer (95).
7. Press the Ramp Cover (131) downward onto the Ramp (130). 7 131 130 8. Identify the Right Link Arm (43), which is marked with an “R” sticker. Orient the Right Link Arm as shown. 8 Apply grease to the axle on the Right Pedal Arm (12). Slide the Right Link Arm (43) onto the axle. Attach the Right Link Arm (43) with an M8 x 16mm Screw (102), a Small Axle Cover (56), and an M8 Washer (95). Next, apply grease to a Link Arm Axle (114).
9. Identify the Right Upper Body Arm (8), which is marked with a “Right” sticker, and orient it as shown. 9 Avoid pinching the Right Grip Wire (45) 9 Have a second person hold the Right Upper Body Arm (8) near the Right Upper Body Leg (6). Locate the wire tie in the right side of the Upright (5). Tie the wire tie to the Right Grip Wire (45). Pull the upper end of the wire tie until the Right Grip Wire is routed through the Upright.
11. Attach the Front Upright Cover (24) to the Upright (5) with four M4 x 16mm Screws (106). 11 24 5 106 12. Attach the Rear Upright Cover (25) around the Upright (5) by pressing the tabs on the Rear Upright Cover into the Front Upright Cover (24). 12 24 5 25 13. Make sure that all parts of the elliptical are properly tightened. Note: Extra parts may be included. To protect the floor or carpet from damage, place a mat under the elliptical.
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD box cover is grounded before using an adapter. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The power cord has a plug with a grounding pin.
HOW TO MOVE THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL To move the elliptical, first fold it as described on page 13. Next, stand in front of the elliptical, hold the upright, and place one foot against one of the wheels. Pull the upright until the elliptical rolls on the wheels. Carefully move the elliptical to the desired position, and then lower it to the floor. To mount the elliptical, hold the upper body arms and step onto the pedal that is in the lowest position.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE With the iFit Live mode, you can download personalized workouts, create your own workouts, track your workout results, and access many other features. See www.iFit.com for complete information. The advanced console offers an array of features designed to make your workouts more effective and enjoyable. To purchase an iFit Live module at any time, go to www.iFit.com or call the telephone number on the front cover of this manual.
HOW TO TURN ON THE POWER 3. Change the resistance of the pedals and the incline of the ramp as desired. IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 13). Next, locate the power switch on the frame near the power cord.
Resistance—This display mode will show the resistance level of the pedals for a few seconds each time the resistance level changes. If the display does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or squeeze the metal contacts tightly. For optimal performance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts.
HOW TO USE A PRESET WORKOUT When the first segment of the workout ends, the resistance level, ramp incline, and the target rpm for the second segment will appear in the display for a few seconds to alert you. The next segment of the profile will begin to flash, and the pedals will automatically adjust to the resistance level and the ramp incline for the next segment. 1. Begin pedaling or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 16. 2.
HOW TO USE THE IFIT TRAINING MODE HOW TO USE THE INFORMATION MODE The optional iFit Live module allows your console to communicate with your wireless network and unlocks exciting new features. For example, you can download personalized workouts, create your own workouts, track your workout results, and access many other features on the iFit Live website. To purchase an iFit Live module at any time, go to www.iFit.com or see the front cover of this manual.
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. Replace any worn parts immediately. HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To clean the elliptical, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damaging the console, keep liquids away from the console and keep the console out of direct sunlight. To adjust the reed switch, first unplug the power cord.
Using the flat screwdriver, release the tabs on the Access Cover (20), and lift the Access Cover off the elliptical. Then, remove the seven indicated M4 x 16mm Screws (106), and remove the Left Shield (19). HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted. 20 To adjust the drive belt, first unplug the power cord.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 18 2 4 2 1 2 1 2 2 1 2 1 3 1 1 1 1 2 4 1 2 2 Model No. PFEL89909.4 R0412A Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 3 18 4 1 1 48 2 2 4 2 4 8 2 2 1 1 2 2 1 1 2 1 1 1 1 2 2 2 Description Key No. Qty. Small Snap Ring M8 x 16mm Screw M8 Split Washer Left Grip Wire Pulse Wire M4 x 16mm Screw M10 x 25mm Screw M10 x 32mm Washer M8 x 16mm Screw M8 x 23.
49 51 31 30 50 102 9 31 127 13 113 58 144 128 52 53 95 106 58 56 102 102 95 47 62 15 44 95 112 10 58 121 104 102 46 58 54 112 26 30 114 47 111 31 62 112 58 11 7 54 33 27 95 12 55 10 111 102 32 101 31 40 56 25 48 34 112 102 103 106 62 111 112 14 101 32 102 106 57 118 57 47 102 105 46 28 95 47 58 114 106 58 56 24 56 52 121 56 106 127 128 53 102 102 45 35 58 95 51 50 8 49 58 102 102 95 54 95 113
41 37 116 100 39 125 115 4 129 75 73 86 99 76 86 75 98 2 41 96 97 94 86 87 74 72 70 80 68 59 106 76 77 92 81 79 69 106 82 151 85 90 91 61 38 37 119 71 87 84 88 78 109 122 94 60 83 101 89 133 64 29 67 86 39 147 132 131 108 86 42 124 41 148 65 145 136 109 117 66 109 110 107 132 130 29 141 141 64 145 117 140 120 106 126 110 109 36 16 139 138 93 137 140 23 106 93 146 36 63 64 142 142 135 134 3 143 100
17 27 106 106 29 29 106 20 106 106 19 106 106 106 106 106 106 106 106 29 29 18 106 29 22 106 21 17 106 106 EXPLODED DRAWING C Model No. PFEL89909.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.