Model No. PFTL49507.0 Serial No. USER'S MANUAL Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. CALL TOLL-FREE: 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MST Sat. 8 a.m.–4 p.m. MST ON THE WEB: www.proformservice.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.
24. Inspect and properly tighten all parts of the treadmill regularly. 20. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off circuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.) 25.
BEFORE YOU BEGIN ual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Thank you for selecting the revolutionary PROFORM® SPORT 1100 treadmill. The SPORT 1100 treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective.
(106)–4 2 1/2” Bolt (37)–2 ASSEMBLY Nut (32)–2 Wheel 3 1/2” Bolt (45)–4 to assemble the treadmill, call technician toll-free 1-800-445-2480. To hire an authorized service Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not Bolt Handrail dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is (64)–4 coated with high-performance lubricant.
2. Slide a Front Endcap (80) onto the Base (81). Partially tighten an Endcap Screw (79) into the Front Endcap and the Base. 2 79 80 81 Slide a Wheel Housing (86) onto the Base (81). Attach the Wheel Housing with a 1" Tek Screw (77), a Base Pad (89), and a 1 1/4" Tek Screw (49) as shown. 86 Attach an additional Base Pad (89) to the Base (81) with a 1" Tek Screw (77). 89 77 89 49 77 3. With the help of a second person, carefully tip the treadmill onto its right side as shown.
5. With the help of a second person, carefully raise the Left Upright (70) and the Right Upright (not shown) to a vertical position. 5 Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Then, insert the pin into the Latch Housing (71), and tighten the knob onto the pin. 70 71 Knob See steps 2 and 4. Fully tighten the two Endcap Screws (79). Spring Collar Pin 6.
8. While a second person holds the console assembly near the Pulse Bar (66), connect the Console Ground Wire (107) on the Pulse Bar to the ground wire from the console assembly. 8 Connect the wire from the console assembly to the Upright Wire (75). Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and then try again.
11. Lower the Uprights (70, 76) as shown. 11 Start the two indicated Console Screws (67) into the Left and Right Uprights (70, 76) and the console assembly. If necessary, pull back on the console assembly slightly to align the holes in the Uprights with those on the console assembly. Start the other two Console Screws before tightening all four Console Screws; do not overtighten the Console Screws. Console Assembly Start First 67 Start First 70 67 76 12. See the inset drawing.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets. Your treadmill features a walking belt coated with highperformance lubricant.
CONSOLE DIAGRAM Key Clip Note: If there is a thin sheet of plastic on the face of the console, remove it. FEATURES OF THE CONSOLE tom workout programs and save them in memory for ETPF49507 future use. PFTL49507 The treadmill console offers an impressive array of To use the manual mode of the console, follow the features designed to help you get the most from your steps beginning on page 13. To use a personal trainer workouts.
HOW TO TURN ON THE POWER 3. Start the walking belt. IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged. Plug in the power cord (see page 11). Next, locate the reset/off circuit breaker on the treadmill frame near the power cord. Switch the circuit breaker to the reset position.
The Calories/Distance display—This display will show the approximate number of calories you have burned and the distance that you have walked or run during your workout. The display will change from one measurement to the other every few seconds. To review specific information, press the Display button repeatedly until the displays show the information that you are most interested in viewing. 6. Measure your heart rate if desired.
HOW TO USE A PERSONAL TRAINER QUICK PROGRAM During the program, the profile will show your progress (see the drawing above). The flashing segment of the profile represents the current segment of the program. The height of the flashing segment indicates the speed setting for the current segment. At the end of each segment, a series of tones will sound and the next segment of the profile will begin to flash.
4. Follow your progress with the matrix and the displays. Each custom program is divided into one-minute segments. One Current Segment speed setting and one incline setting can be programmed for each segment. The speed setting for the first segment will be shown in the flashing segment of the profile. To program a speed setting and an incline setting for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the Quick Speed and Power Incline buttons.
HOW TO USE YOUR OWN QUICK PROGRAM The program will continue in this way until the last segment of the profile flashes in the Current Segment column and the last segment ends. The walking belt will then slow to a stop. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. If desired, you can redefine the program while using it. To change the speed or incline setting for the current segment, simply press the Power Incline, Quick Speed, or numbered speed buttons.
THE INFORMATION MODE An “E” for English miles or an “M” for metric kilometers will appear in the Quick Speed display. Press the Speed increase button to change the unit of measurement. The console features an information mode that keeps track of the total number of miles that the walking belt has moved and the total number of hours that the treadmill has been operated.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may permanently damage the treadmill. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame downward until the catch is past the latch pin. Frame Open Latch Knob Latch Pin 2. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If you need further assistance, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 11).
With the help of a second person, carefully raise the Uprights (70, 76) as shown. Carefully pivot the Hood (28) off. 70 76 28 Locate the Reed Switch (39) and the Magnet (6) on the left side of the Pulley (7). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If necessary, loosen the Screw (11), move the Reed Switch slightly, and then retighten the Screw.
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes.
EXERCISE GUIDELINES ergy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
PART LIST—Model No. PFTL49507.0 R0607A To locate the parts listed below, see the EXPLODED DRAWING on pages 28 to 31. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 2 10 1 2 2 1 1 2 4 2 13 2 5 1 1 1 2 2 2 2 2 1 24 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 2 6 2 1 1 1 1 1 1 2 5 Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 1 1 4 1 1 1 Description Key No. Qty. Console Fan Console Ground Wire Isolator Washer Rear Roller Controller Wire Front Roller Nut * – 12" Blue Wire, 2F – 12" Blue Wire, M/F * * – 22" Red Wire, M/F * – 20" Black Wire, M/F *These parts are not illustrated. Specifications are subject to change without notice.
2 28 20 72 19 21 18 2 23 17 11 22 12 14 24 103 2 1 20 16 21 72 11 104 25 10 15 23 18 103 2 9 17 19 2 8 3 2 5 4 26 2 27 11 103 7 6 2 12 11 9 103 5 10 8 1 2 4 2 EXPLODED DRAWING A—Model No. PFTL49507.
EXPLODED DRAWING B—Model No. PFTL49507.
EXPLODED DRAWING C—Model No. PFTL49507.
EXPLODED DRAWING D—Model No. PFTL49507.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.