Installation Guide

3.
Installing Your Fan
Figures 1&2 are examples of different ways to
mount the outlet box.
If there isn't an existing cUL listed mounting box,
then read the following instructions. Disconnect
the power by removing fuses or turning off circuit
breakers.
Secure the outlet box directly to the building
structure. Use appropriate fasteners and building
materials. The outlet box and its support must be
able to fully support the moving weight of the fan
(at least 35 lbs). Do not use plastic outlet boxes.
Tools Required
Mounting Options
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY, MOUNT FAN ONLY TO AN OULET
BOX MARKED ACCEPTABLE FOR FAN SUPPORT AND
USE THE MOUNTING SCREWS PROVIDED WITH THE
OULET BOX. OUTLET BOX COMMONLY USED FOR
THE SUPPORT OF LIGHTING FIXTURE MAY NOT BE
ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO
BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN
IF IN DOUBT.
Outlet Box
Outlet Box
Outlet Box
Figure 2
Figure 1
To hang your fan where there is an existing fixture
but no ceiling joist, you may need an installation
hanger bar as shown in Figure 3
(available at your
Progress Lighting Retailer).
Figure 3
Phillips screwdriver, straight slot screwdriver, step
ladder and wire cutters.