Installation Guide

6.
Attaching the Fan Blades
WARNING: TO REDUCE THE RISK OF
PERSONAL INJURY, DO NOT BEND THE BLADE
WHILE INSTALLING, BALANCING THE BLADES,
OR CLEANING THE FAN. DO NO INSERT
FOREIGN OBJECTS BETWEEN ROTATING FAN
BLADES.
Screws
Mounting
Bracket
Finishing the Fan
Installation
Figure 9
Decorative
Ring
Studs
Figure 10
Blade
Screws
Figure 11
1.
2.
Move fan into position over the mounting
bracket and secure with the 4 screws provided.
(Fig. 9)
Raise the decorative ring up against the
mounting bracket, the four supports inside the
decorative ring should be placed against the
four studs on mounting bracket, twist the
decorative ring clockwise until snug (Fig. 10).
1.
2.
Insert the blade through the slot in the blade
holder. Align the holes in the blade and the fan
blade holder and secure with a the screw and
fiber washer. (Fig. 11)
Tighten each screw securely starting with the
center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.