User manual

Clock function Application
TIME OF DAY To show the time of day. To change the time of day, refer to
"Setting the time".
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can use Dura-
tion and End at the same time (Time delay) if you want the
appliance to activate and deactivate automatically later.
SET+GO To start the appliance with necessary settings with only one
touch of the sensor field any time later.
Count Up Timer
The Count Up Timer is not
activated if Duration and End are
set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch .
2. Touch
until the display shows
"00:00" and the Count Up Timer starts
to count up again.
Setting the DURATION
1.
Activate the appliance and set an oven
function and temperature.
2.
Touch again and again until the
display shows
.
flashes in the display.
3. Use
or to set the minutes for
DURATION.
4.
Touch
to confirm.
5. Use or to set the hours for
DURATION.
If you touch
or while
you set the DURATION, the
appliance switches to the
setting of the END function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field or open the oven
door to stop the acoustic signal.
8. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven
function and temperature.
2. Touch
again and again until the
display shows .
flashes in the display.
3. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic signal
sounds for two minutes. symbol and the
time setting flash in the display. The
appliance deactivates.
4.
Touch a sensor field or open the oven
door to stop the acoustic signal.
5.
Deactivate the appliance.
Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a programme)
and temperature (refer to "Setting the
oven function" and "Changing the
temperature").
2. Set the DURATION (refer to "Setting the
DURATION").
3. Touch again and again until
flashes in the display.
4. Touch
to set the SET+GO function.
Progress 17