User manual

Automatic programmes
1. Activate the appliance.
2. Touch
.
The display shows
and the number of
the automatic programme.
3. Touch or to choose the
automatic programme.
4. Touch or wait five seconds until the
appliance automatically starts to work.
When you choose an
automatic programme with
microwave mode, the
appliance will not start
automatically if you do not
close the door. After you
close the door, confirm the
selection with
.
5.
When the set time ends, an acoustic
signal sounds for two minutes. The
symbol flashes.
The appliance deactivates.
6.
Touch a sensor field or open the door
to stop the acoustic signal.
Automatic programmes with
weight input
If you set the weight of the meat, the
appliance calculates the roasting time.
1. Activate the appliance.
2. Touch .
3. Touch or to set the weight
programme.
The display shows: the cooking time, the
duration symbol , a default weight, a unit
of measurement (kg, g).
4.
Touch or the settings save
automatically after five seconds.
The appliance activates.
5.
You can change the default weight
value with
or . Touch .
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
7.
Touch a sensor field or open the door
to stop the acoustic signal.
USING THE ACCESSORIES
WARNING! Refer to Safety
chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray:
Push the baking tray between the guide
bars of the shelf support.
Progress 19