Operation Manual

Electronic adjustment
1. Press and hold the start/cancel button.
2. Turn the programme knob clockwise
until the first washing programme is
aligned with the on/off indicator.
3. Release the start/cancel button when
the on/off indicator and the start/cancel
indicator start to flash.
• At the same time, the end indicator
flashes intermittently. The number of
flashes shows the setting of the water
softener (example: 5 flashes / pause /
5 flashes = level 5).
4. Press the start/cancel button again and
again to change the setting. Each time
you press the start/cancel button, the
adjustment increases by 1 level.
5. Deactivate the appliance to confirm.
If the water softener is set electronically
to the level 1, the salt indicator light
stays off.
USE OF DISHWASHER SALT
How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with
salt.
22 progress