Owner manual

C2000
Program & Report
‚ 14
PROGRAM & REPORT
Introduction
The Program & Report Section describes the operation and
resulting information provided by the C2000
program and report
functions
. These functions allow the manager to configure the
C2000 for the specific type of operation desired and to retrieve
important data collected. This management information is
protected by the use of a unique Manager PIN Code (factory
default — 2422). This Manager PIN Code may be changed by the
manager at any time through the use of one of the program and
report functions.
As you review this section of the manual, please refer to Figure 2
for general locations of the various keys, indicators and display.
While using program and report functions, the fields on the display
will vary from function to function, depending upon the type of
data being displayed or requested.
Refer to Program & Report in the Quick Reference Guide at the
end of this manual.