Owner manual

C2000

Program & Report

‚ 16

Operator Access

Access to report functions is accomplished through the entry of

a valid Operator PIN Code. First, press the

key. You will be prompted by the display to enter your PIN

Code. Enter your Operator PIN Code on the numeric keypad.

(This number, with a maximum of four digits, is stored in the

C2000. Its purpose is to limit access to C2000 report data. The

number

1111

is the factory default value for the Operator PIN

Code.) Next, press the

<ENTER>

key.

M:0

will appear in the

display, prompting you to enter the desired function mode

number on the numeric keypad. Press

<ENTER>

again to

generate the requested program & report function sequence. At

this point, if you wish to return to the operator mode, press the

key.