Owner manual

C2000

Program & Report

‚ 18

To set the service mode, press the

key to toggle

between full- or self-service for the specified pump.

If the dispenser is a blending dispenser, on the numeric keypad

enter the amount, in percent of hose 1, to be dispensed by the

selected hose. Press

<ENTER>

. Remember that any data

entered on the numeric keypad will appear on the display. If

the dispenser is a multi-product dispenser, then press

to scroll to the next hose to be programmed.

Follow this procedure to program each pump/dispenser at the

site.

To exit Mode 1, press the

key. The C2000

display returns to the

mode entry

prompt. To exit programming

mode completely, press the

key again. The

C2000 will return to operator mode.

Mode 2 — Product Information

(Manager only)

In this mode, Product Name, Cash PPU and Credit PPU for

each product at the site are programmed. To enter this mode

from the

mode number

prompt, press

<2>

on the numeric

keypad and then press

<ENTER>

. You are now in Mode 2.

The display now prompts for information about product #1. To

assign a product name such as UL, REG or DIESEL to this

product, press the

<GRADE>

key until the desired product

name is presented in the display. If you wish to just view the

product name already assigned, press the

key and