Installation Guide
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Mounting screw
Mounting bracket
Mounting bracket
Cap nut
Cap nut
x 2
x 1
x 1
x 1
x 1
x 3
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together.
Wire nut
B
BB
B
B
B
B
CC
CC
DD
DD
B
AA
AA
ASSEMBLY INSTRUCTIONS
4
5
5. Install light bulbs (not included). Use three
60-watt max. standard-base bulbs or three
13-watt standard-base CFL bulbs.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
4 5
4. Place xture (A) onto mounting bracket (CC). Adjust
threaded rod on mounting bracket (CC) to allow
xture (A) to rest ush against the ceiling when cap
nut (DD) is tightened.
DD
CC
A
or
Lowes.com Lowes.com
BB
DD
CC
1. Remove cap nut (DD) from mounting bracket (CC).
Attach mounting bracket (CC) to the outlet box (not
included) with mounting screws (BB).
Note: Preassembled threaded rod on mounting
bracket (CC) should protrude away from outlet box.